Linear Charger

Specification For Download
LP28056S-Linear Charger
1000Charge Current(mA):
3.9-7.0Input Voltage(V):
4.2Input OVP(V):
1Cells:
CC/CVMode:
-Temperature Monitor:
2State Monitor:
CTC,1.2A Large Current,Low Cost,OTP,OCPSpecial Features:
ESOP8Package:


1.2A Single-chip Li-ion and Li-POL Charge



General Description

The LP28056S is a complete constant-current / constant-voltage linear charger for single cell lithium-ion batteries. Its ESOP-8 package and low external component count make the LP28056S ideally suited for portable applications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be ISET rammed externally with a single resistor. The LP28056S automatically terminates the charge cycle when the charge current drops to 1/10th the RISET rammed value after the final float voltage is reached. When the input supply is removed, the LP28056S automatically enters a low current state, dropping the battery drain current to less than 1μA. The LP28056S can be put into shutdown mode, reducing the supply current to 1μA. Other features include charge current monitor, under voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.
 


Applications
 

 Portable Media Players/MP3 players
 Cellular and Smart mobile phone
 PDA/DSC
 Bluetooth Applications

 


Features
 

 Programmable Charge Current Up to 1200mA
 No MOSFET, Sense Resistor or Blocking Diode Required
 Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
 4.2V Charge Voltage with ± 1% Accuracy
 1μA Supply Current in Shutdown
 Short-circuit protection
 Consumption Available in ESOP-8 Package
 RoHS Compliant and 100% Lead (Pb)-Free

 

Marking Information
 

Please see specification. 
Please ask our service mailbox for what you want which is marketing@lowpowersemi.com.
We will send a copy to you as fast as we can.
 


 

Consultation:086-755-33000088
E-Mail:marketing@lowpowersemi.com
Copyright © LPS Consulting 2005,All Right Reserved. 粤ICP备14043779号-1