LP4065-Linear Charger

产品型号 充电电流(mA) 输入电压(V) 电池电压(V) 电池节数 工作模式 温度检测 状态指示 特征 封装 规格书
LP4065 800 4.5-28 4.2 1 CC/CV - 1 CTC,High Vin voltage,Low size,OTP SOT23-6

800mA Single Chip Li-Ion and Li-Polymer Charger

General Description

The LP4065 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion battery. Its SOT23-6 package and low external component count make the LP4065 ideally suited for portable applications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be ISET programmed externally with a single resistor. The LP4065 automatically terminates the charge cycle when the charge current drops to 1/10 setting current value after the final float voltage is reached. When the input supply is removed, the LP4065 automatically enters a low current state, dropping the battery drain current to less than < 1μA. Other features include charge current monitor, under voltage lockout, automatic recharge and a status pin .


 Portable Media Players/Game
 Power Bank
 Bluetooth Applications



 Input Voltage up to 28V
 Input Over Voltage Protection:7V
 Short-circuit protection
 Programmable Charge Current :300mA to 800mA
 < 1μA Battery Reverse Current
 Protection of Reverse Connection of Battery
 No MOSFET, Sense Resistor or Blocking Diode
 Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
 SOT23-6 Package
 RoHS Compliant and 100% Lead (Pb)-Free

Marking Information

Please see specification. 
Please ask our service mailbox for what you want which is marketing@lowpowersemi.com.
We will send a copy to you as fast as we can.


业务咨询热线:0755-33000088 电子邮件:marketing@lowpowersemi.com Copyright © LPS Consulting 2005,All Right Reserved. 粤ICP备14043779号